Call Us +234-818-708-8888

Auto Control Gates


Warning: Use of undefined constant Ihrss - assumed 'Ihrss' (this will throw an Error in a future version of PHP) in /homepages/14/d450721695/htdocs/divergy/wp-content/themes/u-design/page-FullWidth.php on line 13

SLIDING GATE OPERATORS

  • Remote control based gate automation
  • Suitable for  sliding gates
  • Automatic overload protection
  • Electro-mechanical lock
  • Battery backup during power failure
  • Advanced power saving features
  • Switch to operate gate from inside without remote
  • Intelligent Object Detector
  • Mechanical release option in the case of emergency
  • Customizable to client needs
  • Keypad option for open and close
  • Flash light indication during operation
  • Easy Installation
A 12V DC battery revs the CENTURION D2 Turbo domestic sliding gate motor up to 9000rpm so it’ll move gates weighing up to 250 kilograms at up to 24 metres per minute. Now that’s fast!

Sleek, strong, stylish – and even eco-conscious – this CENTURION has it all.

Main features

  • Choose your speed
    Select the Low Speed Profile to make sure your kids and pets are safe. Alternatively, kick it into high gear with the D2 Turbo‘s High Speed Profile to open and close your gate in the blink of an eye. Any criminals trying to follow behind you had better be quick…
  • Always on guard
    Reliable battery backup ensures that this CENTURION remains on high alert, come blackouts, brownouts or nights out on the town. When you get home, your D2 Turbo will be standing by to let you in at the touch of a button. For extended standby power you can upgrade the compact 5Ah battery to a standard 7Ah capacity one.
  • Adaptive collision sensing
    Even with the High Speed Profile engaged, our advanced Adaptive Collision Sensing system helps to ensure that your car and your family are out of harm’s way.
  • Easy installation
    The CENTURION D2 Turbo really lives up to its name – even installation is quick. Fit the gate motor quickly, using a simple foundation plate and clever jacking system. Full access to mounting bolts, easy cable entry and plug-in terminals make finishing the job off even faster.
  • Simple setup
    The only thing quicker than installing the D2 Turbo is setting it up.Use one dial to select the function (eg. Autoclose Timer) and the other dial to select the relevant option (eg. 15 seconds). Then push the button and voila! It’s ready to go!
  • Quick maintenance
    The D2 Turbo‘s integrated controller with an onboard receiver and charger complements its click-together modular design, and makes for lightning-quick disassembly, replacement of parts and reassembly.
  • Stylish design
    Small but tough – and good looking too! The D2 Turbo is a worthy addition to any driveway.
  • Onboard multichannel receiver1
    What is speed without control? Map the buttons on the receiver so that any one button on your remote control can either open the gate fully for a car, partially for a pedestrian or activate Holiday Lockout Mode.
    1. CENTURION code-hopping
  • Reliable operation
    Just like every CENTURION product, you can count on the D2 Turbo to look after your home for a very long time. Advanced engineering polymers and smart design combine to create a gate motor that runs for over 30 000 cycles. That’s around ten years of moving an average domestic gate!
  • Lockable, easy manual override
    The CENTURION D2 Turbo is strong – so you don’t have to be. One quarter-turn of the manual override wheel and your gate’s in Manual Mode. A lock-protected mechanism makes sure that it’s not so easy for a criminal to do it!
  • Electrical spike protection
    Whatever electrical spikes are thrown at the D2 Turbo, be it lightning or an electrical surge from your local power grid, the D2 Turbo can handle just about anything. Rest easy knowing that the D2 Turbo will continue to stand guard, ensuring that you can always get in.
  • Minimal materials used for construction – almost 100% recyclable
    Tested in the factory, in the field, and then tested some more, the D2 Turbo has been optimised formaximum performance using minimal materials and is one of the first ‘green’ operators.
  • Forever yours
    We know that this compact companion will serve you well – year, after year, after. So just like all other CENTURION products, your beautiful D2 Turbo gate motor also comes with an industry-leading 24 month warranty for added peace of mind.
  • Compact, but TOUGH
    Built for speed and safety, this baby can quickly and safely move gates weighing up to 250kg! Nothing’s going to slow your CENTURION D2 Turbo down!
  • Pick your profile?
    With Multiple Operating Features to choose from, your D2 Turbo can operate your gate the way YOU want it to. Choose from Standard, Open Only or Reversing Mode. This gate motor can handle them all – addAutoclose and PIRAC Modes and you’ve got the quickest, safest and smartest access automation on the block.
DOMESTIC AND LIGHT-INDUSTRIAL SLIDING GATE OPERATORMain featuresBattery backupPotent push forceIntelligent speed controlRapid and smooth opening and closing

Exceptionally easy system set up via LCD user interface

Onboard NOVA (Keeloq TM encryption) multichannel receiver with selective delete

Multiple operating features including alarm modes

Integral ChronoGuard (patent pending) timer functionality

Models

D5-Evo – The evolution of the tried and tested D5, 500kg gate operator for domestic and light-industrial applications

Technical Details

D5-Evo’s Technical Data
Data Description
Input voltag 220V AC +/-10%, 50Hz
Motor voltage 12V DC
Motor power supply Battery driven – 2A charger
Push force – rated 17kgf
Gate speed at push force < 5kgf 22m/min
Gate speed at rated push force 18m/min
Duty cycle – mains present 50%
Daily operations – max 150
Gate mass – max 500kg
Onboard receiver specification NOVA rolling code,multichannel, 433MHz, capacity – 125 transmitter buttons

– Can operate off a solar supply, consult Centurion Systems for assistance
– 2 x 7Ah battery (can be upgraded for longer power failure autonomy)
– Based on a pull force of less than 50% of rated
– Based on 25oC ambient temperature and unit not in direct sunlight
– Keeloq TM encryption

INDUSTRIAL SLIDING GATE OPERATORMain featuresBattery backupRapid operating speedIntelligent speed controlHigh duty cycle capability

Smooth acceleration and deceleration

Multiple operating features, including alarm modes

Exceptionally easy system set up via LCD user interface

Onboard NOVA multichannel receiver with selective delete

Integral ChronoGuard TM (patent pending) timer functionality

Models

D10 – Using CENTURION’s proven DC technology, this is the complete solution for commercial and industrial gates up to 1000kg

Technical Details

D10’s Technical Data
Data Description
Input voltag 220V AC +/-10%, 50Hz
Motor voltage 24V DC
Motor power supply Battery Driven – 1.8A charger
Push force – rated 30kgf
Gate speed (varies with load) 22 – 26m/min
Duty cycle – mains present 45%
Daily operations – max 750
Gate mass – max 1000kg
Onboard receiver specification NOVA rolling code ,multichannel, 433MHz, capacity – 500 transmitter buttons

– Can operate off a solar supply, consult Centurion Systems for assistance
– 2 x 7Ah battery (can be upgraded for longer power failure autonomy)
– Based on a pull force of less than 50% of rated
– Based on 25oC ambient temperature and unit not in direct sunlight
– Keeloq TM encryption

 HIGH-SPEED INDUSTRIAL SLIDING GATE MOTORThe lightning-fast CENTURION D10 Turbo industrial sliding gate motor is the perfect solution for speed freaks to get their fix. Whether you’re just in a hurry, or seriously concerned about your security, there is no time wasted with the D10 Turbo at your gate. This beast will move a gate weighing up to 1000kg and, depending on the weight of the gate, can reach speeds of up to 50 metres per minute. It’s our fastest operator yet!Main featuresSpeed and power
Brains, brawn and whirlwind speed! A robust but quiet 24V DC motor, coupled with a precision die-cast aluminium gearbox, generates enough torque to allow the D10 Turbo to shift a four metre gate in less than five seconds! An oil-lubricated gearset makes sure that this gate motor will just keep on going.Intelligent speed control
A gate motor to suit your lifestyle. Play it safe and set your gate to move slowly so your children won’t be hurt. If it’s your security you are worried about, open the gate so fast that you don’t have to slow down when you turn into your driveway. It will lock behind you in a matter of seconds.Battery backup
A 24V battery with rapid charger ensures that come low voltages, power spikes or failures, you can always get in or out.

Accurate and safe position control
With the D10 Turbo on guard, there’s no chance that your gate will damage your vehicle or hurt your children or pets. The tiniest obstruction will stop your gate dead in its tracks.

Attractive styling
This CENTURION’s sleek design and rugged, yet modern armour will complement any driveway.

Jam-free manual override
An innovative conical design means no more jamming. The CENTURION D10 Turbo can be put into manual so effortlessly! No more smarting thumbs or put out backs.

Easy setup for simple installation
Ready? With only two bolts required to secure the D10 Turbo, this – along with its sibling the D10 – is our easiest unit to install yet! We’ve incorporated a jacking system so levelling of the gate motor is a cinch. Mounting points are slotted allowing large adjustment to align the operator with the gate. Set. Go!

Intelligent automatic setup
Once you’ve got it in, it basically sets itself up. Use your LCD controller to follow an easy to use Q and A system that makes setting up things like gate End-of-travel Limits as easy as setting the time on your watch. The D10 Turbo does all the thinking for you.

Multiple operating features
With so many features, you’re going to have to buy the D10 Turbo just to try them all out! One of our favourites is Holiday Lockout Mode – once enabled, your gate will become totally immobilised. The only way to get in will be to go straight through – with something very large.

Operate wirelessly, thanks to CENTURION1
Besides its code-hopping technology offering the highest level remote control security, this multichannel and multi-user CENTURION onboard receiver allows for a multi-button remote to operate any combination of the system inputs, such as Gate Trigger, Pedestrian Opening, Holiday Lockout, etc. It stores up to 500 transmitter buttons, and amongst other access control features, it provides the ability to selectively add and delete transmitter buttons saved into its memory.
1. CENTURION code-hopping

Alarm features (a world first)2
Burglars have some nifty techniques to get into your home. Forrtunately, criminals can’t outsmart theCENTURION D10 Turbo. An ambush alarm will alert your security company if the opening or closing beams are interrupted for a predefined, but adjustable, time. Similarly, a Break-in Alarm will go off if the closing beam oustide your house is interrupted. Their gig is up.
2. Reguires gate safety beams to be installed

Advanced diagnostics
Our intelligent LCD-based controller puts the power of the D10 Turbo at your fingertips. An intuitive and user-friendly interface gives you access to features you never even knew existed. Beyond setting one of the gate motor’s numerous functions and monitoring diagnostic info – they will actually let you know if something is wrong. Somebody’s been loitering at your gate? Your controller will tell you.

ChronoGuard timer technology (a world first)
This operator is so advanced that it no longer needs humans to look after it. With CENTURION’sChronoGuard timer technology onboard, many of the features can be set to operate automatically or be time-barred at any time you choose. Its built-in Real Time Clock and Calendar allows you to set up different exclusions, which can cater for public holidays, special Time-periods, etc.

D10’s Technical Data
Data Description
Input voltage 220-240V AC, 50Hz
Motor voltage 24V DC
Motor power supply Battery Driven – (standard capacity 2 x 7Ah)
Push force – rated 15kgf
Gate speed (varies with load) 40 – 50m/min
Duty cycle – mains present 25%
Daily operations – max 750
Gate mass – max 1000 – 240kg (depending on speed settings)
Onboard receiver specification CENTURION code-hopping ,multichannel, 433MHz, capacity – 500 transmitter buttons

– Can operate off a solar supply, consult Centurion Systems for assistance
– 2 x 7Ah battery (can be upgraded for longer power failure autonomy)
– Based on a pull force of less than 50% of rated
– Based on 25oC ambient temperature and unit not in direct sunlight

Capable of handling sliding gates up to 2 tonnes in mass, and in arduous operating conditions, the automatic choice for commercial and industrial applications is the A10.The A10 uses a 3-phase AC motor and electronic inverter to provide ultra rapid opening and closing of the gate. The speed can be increased from 16 up to 30 metres per minute and is adjustable between opening and closing. The inverter’s added advantage of total speed control, makes for the fastest, smoothest starting and stopping of any sliding gate on the market in addition to extending the long term reliability of the system. Combining the running characteristics of the 3 phase motor and the efficiency of the inverter, the A10 continues to run cool even in high duty applications.Although the A10 uses a 3 phase motor, thanks to the inverter, it still connects to a standard 220V AC single phase supply making the unit the ideal gate motor for virtually any domestic and industrial application. The clever design of the mechanical aspects makes installation quick and easy.In addition to the already exceptional benefits of the standard A10, an optional, DC converter module can be added to give battery back-up. Solar power can be used to recharge the batteries enabling even the most remote sites to enjoy the security and convenience provided by the automatic choice in sliding gate motors.Main features

High push force

High duty cycle capability

Extremely rapid operating speed

Intelligent and smooth speed control

Multiple programmable features

Optional battery back-up

Models

A10 Endurance – A rapid and robust operator for commercial and industrial gates up to 1000kg,
A10 Heavyweight – An all round performer for gates up to 2000kg

Technical Details

A10’s Technical Data
Data A10 ENDURANCE A10 HEAVYWEIGHT
Input voltag 220V AC +/-10%, 50Hz (single phase)
Motor voltage 24V DC three-phase
Push force – rated
– At standard speed
– At sprint speed
30kgf
22.5kgf
35kgf
NA
Gate speed at rated push force
– Standard speed
– Sprint speed
16m/min
30m/min
13.6m/min
NA
Duty cycle 80%
Gate mass – max
– Standard speed
– Sprint speed
1000kg
600kg
2000kg
NA

– Based on 25oC ambient temperature and unit not in direct sunlight

SWING GATE OPERATORS

VECTOR 2 – DOMESTIC AND LIGHT-INDUSTRIAL LINEAR SWING GATE OPERATORSFor domestic and light industrial swing gate applications the VECTOR2 linear swing gate system with battery back-up offers a quick and easy (not to mention good looking) installation. It is an exceptionally strong set of operators for gates up to 4m wide, per leaf, weighing no more than 350kg.The low profile shape of the VECTOR2 operator enhances its aesthetic appeal and allows it to blend in as unobtrusively as possible with the design of the gate. With full position control the system provides pin point stopping of the gate in the open and closed positions without the need for mechanical end stops. Added to this its sophisticated speed control circuit smoothly operates the gate with reduced shock, loading, and extended reliability.Set-up of the system using the VECTOR2 controller with an intuitive, easy-to-use LCD interface, is absolute child’s play and choosing from a wide range of features, the VECTOR2 system can be adapted to suit almost any application.In 2009 the VECTOR2 became a winner of the prestigious SABS Design Institutes Design Excellence Awards. This was a befitting follow up of the VECTOR prototype winning an SABS Design Institute Prototype in 2004.
Swings gates precisely!

Main features

Battery backup

High push force

Full position control

Fast operating speed

Quick and easy installation

Safe anti-crushing protection

Smooth acceleration and deceleration

Multiple operating features including alarm modes

Exceptionally easy system set up via LCD user interface

nboard NOVA multichannel receiver with selective delete

Models

Vector 400 – Reliable operator for majority of domestic swing gate applications
Vector 500 – Extended stroke for large domestic and light-industrial swing gates

Technical Details

VECTOR 2’s Technical Data
Data V400 V500
Input voltag 220V AC +/-10%, 50Hz
Motor voltage 12V DC
Motor power supply Battery driven-charger 800mA (D) / 2A (LI)
Push force – max 250kgf 250kgf
Gate opening time – typical <14 sec < 17 sec
Duty cycle – mains present 25%(D)/ 50%(LI)
Daily operations – max 50(D) / 200(LI)
Maximum leaf width for corresponding gate mass 2m – 500kg
4m – 200kg
2m – 750kg
4m – 310kg
Onboard receiver specification NOVA rolling code ,multichannel, 433MHz, capacity – 65 transmitter buttons

– Can operate off a solar supply, consult Centurion Systems for assistance
-7A/H battery (can be upgraded for longer power failure autonomy)
– Assumes a 90o opening gate and optimum mounting position
– Based on 25oC ambient temperature and unit not in direct sunlight
D – Domestic LI – Light industrial
– Keeloq TM encryption

R3 – DOMESTIC ROTARY SWING GATE OPERATOR

The R3 rotary arm swing gate operator remains the logical choice for applications where the gate pillar is very wide and will not accommodate the VECTOR2 linear drive system. It can handle domestic gates up to 3.5m wide per leaf weighing no more than 150kg.The R3 also offers battery back-up. The electronic controller and power supply are mounted in the MASTER motor giving the option to wall mount the operators, resulting in an installation that is greatly simplified. As with all CENTURION gate controllers, the R3 offer a wide range of useful features.As with the sliding gate range of operators, this battery driven swing gate operator can also be adapted to operate off a solar power supply.The smooth operator for swing gatesMain features

Battery backup

Full position control

Safe and quiet functioning

Fast and smooth operation

Multiple programmable features

Master motor with integrated controller and PSU

Models

R3 – The logical choice for domestic gates with large pillars

Technical Details

R3’s Technical Data
Data Description
Input voltage 220V AC +/-10%, 50Hz
Motor voltage 12V DC
Motor power supply Battery driven – 800mA charger
Operator output torque – max 95Nm
Typical gate opening time <14 sec
Duty cycle – mains present 25%
Daily operations – max 150
Maximum leaf width for corresponding gate mass 2m – 350kg
3.5m – 150kg

– Can operate off a solar supply, consult Centurion Systems for assistance
– 7Ah battery (can be upgraded for longer power failure autonomy)
– Based on 25oC ambient temperature and unit not in direct sunlight
– Assumes a 90 degree opening gate and pedestal mount

R5 – DOMESTIC AND LIGHT-INDUSTRIAL ROTARY SWING GATE OPERATORThe smooth operator for swing gatesThe R5 is well suited for higher volume sites such as entrances to housing estates and business parks. It can handle gates up to 3.5m wide per leaf weighing no more than 250kg.The R5 also offers battery back-up and with the electronic controller and power supply mounted in the Master motor and with the option to wall mount the operator, installation is greatly simplified.

As with the sliding gate range of operators, these battery driven swing gate units can also be adapted to operate off a solar power supply

Main features

Battery backup

Full position control

Safe and quiet functioning

Fast and smooth operation

Multiple programmable features

Master motor with integrated controller and PSU

Models

R5 – This unit is well suited for large domestic and light-industrial swing gates

Technical Details

R5’s Technical Data
Data Description
Input voltage 220V AC +/-10%, 50Hz
Motor voltage 12V DC
Motor power supply Battery driven – 2A charger
Operator output torque – max 250Nm
Typical gate opening time < 17 sec
Duty cycle – mains present 50%
Daily operations – max 250
Maximum leaf width for corresponding gate mass 2m – 600kg
3.5m – 260kg

– Can operate off a solar supply, consult Centurion Systems for assistance
– 7Ah battery (can be upgraded for longer power failure autonomy)
– Based on 25oC ambient temperature and unit not in direct sunlight
– Assumes a 90 degree opening gate and pedestal mount

IT24N – DOMESTIC AND LIGHT-INDUSTRIAL UNDERGROUND SWING GATE OPERATORMain featuresBattery backupSafe, quiet and reliable operationHidden from view, unaffecting aesthetic appeal of gates

Automate gates with limited to no side wall space

Extremely potent and reliable motor reduction unit

Multiple operating features

Models

IT24N – Powerful underground swing gate operator for domestic and light-industrial application.

Technical Details

IT24N’s Technical Data
Data Description
Input voltage 220V AC +/-10%, 50Hz
Motor voltage 24V DC
Motor power supply Battery driven – 1A charger
Operator output torque – max 360Nm
Typical gate opening time < 20 sec
Duty cycle – mains present 50%
Daily operations – max 200
Maximum leaf width for corresponding gate mass 2m – 550kg
3.5m – 400kg

– Can operate off a solar supply, consult Centurion Systems for assistance
– Battery driven with 2 x 7Ah battery (can be upgraded for longer power failure autonomy)
– Based on 25oC ambient temperature and unit not in direct sunlight
– Assumes a 90o opening gate and optimum mounting position

GARAGE DOOR OPENERS

XTRAC – DOMESTIC SECTIONAL AND TIP-UP GARAGE DOOR OPERATORSMain featuresBattery backup (dual power)

Easy access to setup buttons and replacement of light bulb

Door service monitor

Effortless door operation

Smooth ramp up and ramp down

Adjustable speed control

Whisper quiet movement

Quick and easy installation

Adaptive anti-crushing protection

Wireless wall pendant with dual buttons

Models

XTrac – Quiet, Safe and reliable garage door operator for majority of sectional and tip-up doors.

Technical Details

XTRAC’s Technical Data
Data Description
Input voltage 90 – 290V AC @ 50/60Hz
Motor voltage 24V DC
Motor power supply Dual supply – 9A powerpack 1.8A charger
Opener lifting force – max 120kgf
Door travel speed 100-150mm/sec (adjustable)
Duty cycle – mains present 20%
Daily operations – max 20
Maximum door size 12m2 – (max width 6.5m)
Onboard receiver specification NOVA rolling code ,single channel, 433MHz, capacity – 28 transmitter buttons capacity

 

– Can operate off a solar supply, consult Centurion Systems for assistance
– 2 x 1.2Ah batteries (can be upgraded for longer power failure autonomy)
– Based on 25oC ambient temperature
– Based on a pull force of less than 50% of rated
– Keeloq TM encryption
– Only 1 button per transmitter is used

 

RDO – DOMESTIC ROLL-UP GARAGE DOOR OPERATORSMain featuresBattery backup

Strong lifting capability

Whisper quiet movement

Anti-crushing protection

Quick and easy installation

Wall mounted controller with courtesy light

Wireless wall pendant

Models

RDO – A compact and reliable operator for domestic roll-up doors

Technical Details

RDO’s Technical Data
Data Description
Input voltage 220V +/-10%, 50Hz
Motor voltage 24V DC
Motor power supply Battery driven – 200mA charger – peak
Opener lifting force 30kgf
Door travel speed 100-150mm/sec
Duty cycle – mains present 20%
Daily operations – max 20
Maximum door size 6m2 – (max width 2.8m)
Onboard receiver specification NOVA Voyager rolling code, 433MHz, capacity – 36 transmitter buttons

– Can operate off a solar supply, consult Centurion Systems for assistance
– 2 x 1.2A/H batteries (can be upgraded for longer power failure autonomy)
– Based on a pull force of less than 50% of rated
– Based on 25oC ambient temperature
– Keeloq TM encryption
– Only 1 button per transmitter is used

BARRIERS

CLAWS – ROADWAY SPIKES FOR HIGH SECURITY ACCESS CONTROL

Give your traffic barrier CLAWS – an effective deterrent for high-volume traffic control. Designed to provide a compelling reason for would-be criminals to reconsider their approach; CLAWS are constructed to take a beating but never miss a bit of their own.

CLAWS are available in four different configurations. These can be generally divided into two types of categories: Flush Mount models for installations that are flush with the roadway surface, and Surface Mount models for installations that are mounted above the roadway surface.

The Flush Mount models are ideal for installations that require seamless traffic control for smooth-flowing traffic, whereas the Surface Mount models are mounted above the general surface surface of the roadway and create a traffic calming bump, slowing traffic for a safer access control point.

Both the Flush Mount and Surface Mount models are available in either Direct Drive which utilises the SECTOR barrier’s drive mechanism, or Independent Drivemodels which have their own drive mechanism and controllers.

 

Main featuresStandard modular system ensures good stock continuityModular construction allows components to be transported and installed with ease

Adds high security to traffic barrier access controlled entrances and exits

Robust construction built to withstand impacts from vehicles

High-torque DC motor for greater reliability and resposnive operation

Selective High Security and Safety Modes

Reliable battery backup ensuring continued service even when the lights go out

Easy to maintain saving you time and money

Traffic Yellow coloured spikes for high visibility and increased safety

Four different configurations to ensure a model for just about any application

All moving parts are removable for easy maintenance

External limit switches provide a failsafe operation

Indirect Drive models can operate independently of traffic barrier units

All-weather construction

Easy to change orientation depending on traffic flow requirements

Supports output for robot interface

Variable models and adjustable speed of operation to suit the requirements of just about any installation1

Can be mounted in any position, even away from the traffic barrier1

CLAWS’ spikes can move independently of the SECTOR – such as lower before the barrier raises, and rasie only once the barrier has lowered1

Uses standard SECTOR controller and gearbox allowing for reduced spare inventory

1. Applies to Independent Drive model only

Models

CLAWS Surface Mount models – For installations that are mounted above the roadway surface
CLAWS Flush Mount models – For installations that are flush with the roadway surface

Both the flush mount and surface mount models are available in either Direct Drive which utilises the SECTOR’s drive mechanism, or Independent Drive models which have their own drive mechanisms

 

 

CLAWS Technical Data
Data Direct Drive Independant Drive
Input voltage not applicable 12V DC§
Motor voltage not applicable 12V DC§
Spikes module lengths 1 metre and 1.5 metre – available lengths  to make up total length of spike system required
Spikes raise/lower time As per co-installed SECTOR 1.2 seconds
Daily operations – max 50% of co-installed SECTOR original specification As per co-installed SECTOR
Duty cycle – mains present 50% of co-installed SECTOR original specification As per co-installed SECTOR
Anti-corrosion specification – Main chassis Hot dip galvanized mild steel
Spike material specification 85mm mild steel, electroplated and powder coated
Onboard receiver specification not applicable CENTURION code-hopping, multichannel,
433MHz, with 500 remote control button storage capacity

§ – requires external battery, charger and weatherproof controller housing if unit is installed as a standalone device

 

CENTINEL MANUAL BARRIER – MANUAL TRAFFIC BARRIERIf the requirement is to cordon off a parking lot or entrance to a housing estate where a manned guard is always present, then the CENTINEL manual barrier is a perfect cost-effective answer.The CENTINEL is available with 3, 4.5 and 6 metre boom pole lengths. Using an internal spring the CENTINEL avoids the use of unsightly weights to counterbalance the boom pole. This results in a particularly compact and aesthetically pleasing barrier befitting the entrance to any up-market installation.

Main features

  • Internal spring counterbalance
  • Attractive slim-line construction
  • Convenient actuating handle for raising boom pole
  • Thumbwheel to secure pole in raised or lowered position

Models

CENTINEL 3 – Manual Barrier, 3m boom pole
CENTINEL 4 – Manual barrier, 4,5m boom pole
CENTINEL 6 – Manual barrier, 6m boom pole

Technical Details

CENTINEL’s Technical Data
Data CENTINEL 3 CENTINEL 4 CENTINEL 6
Counterbalance spring Internal
Boom pole length 3.0m 4.5m 6.0m
Boom pole raise time 1.2 sec 3 sec 3 sec
Housing specification Epoxy coated mild or grade 3CR12 stainless steel – white, red cover
Barrier Pole Specification Aluminium, round profile, epoxy coated white, red reflective tape
SECTOR – HIGH-VOLUME INDUSTRIAL TRAFFIC BARRIERSMain featuresBattery backup

High volume capability

Rapid boom pole raise (3m version < 1.2sec)

Smooth intelligent speed control

High torque boom pole operation

Robust, durable and slim-line operator casing

LCD user interface for simple set up

Onboard NOVA rolling code (KeeloqTM encryption)  multichannel receiver with selective delete

Integral ChronoGuard (patent pending) timer functionality

Models

SECTOR 3 – Rapid speed high-volume barrier, 3m boom pole
SECTOR 4 – Standard speed high-volume barrier, 4.5m boom pole
SECTOR 6 – Standard speed high-volume barrier, 6m boom pole

Technical Details

SECTOR ‘s Technical Data
Data SECTOR 3 SECTOR 4 SECTOR 6
Input voltag 220V AC +/-10% @ 50Hz
Motor voltage 12V
Motor power supply Battery driven – 2A charger
Boom pole length 3.0m 4.5m 6.0m
Boom pole raise time 1.2 sec 3 sec 3 sec
Daily operations – max 3000
Duty cycle – mains present 80%
Housing specification Zinc electroplated steel with epoxy coating – traffic yellow
Barrier pole specification Aluminium, round profile, epoxy coated white, red reflective tape ,
Onboard receiver specification NOVA rolling code, multichannel, 433MHz, capacity – 500 transmitter buttons

– Can operate off a solar supply, consult Centurion Systems for assistance
– 7Ah battery (can be upgraded for longer power failure autonomy)
– Based on 25oC ambient temperature and unit not in direct sunlight
– Keeloq TM encryption
– Housing available in a Grade 430 stainless steel for coastal areas with no airborne salt and Grade 316 for extreme corrosion environments

TRAPEX PEDESTRIAN ACCESS CONTROL FOR TRAFFIC BARRIERS from circumventing the SECTOR vehicle access control

The TRAPEX barrier fence is a robust and effective barrier designed to prevent pedestrians from circumventing the SECTOR vehicle access control system. It’s tough, all-weather aluminium construction makes it suitable for coastal and inland applications.

The robust materials and clever industrial design ensures that the TRAPEX will perform day in and day out, relentlessly, for a very long time.

Main features

Easy to install
The simple, yet effective design of the TRAPEX barrier fence allows you to pop-rivet the TRAPEX modules into place onto the barrier pole which in turn lets the TRAPEX swivel freely and ensures extremely easy vertical alignment of the upright poles. The modular construction allows for the TRAPEX to be installed by a single technician, providing for a hassle-free installation and saving you time and money. The only thing easier than installing it is watching it work trouble free year upon year.

All-weather construction
The powder-coated aluminium materials used to construct the TRAPEX allows you to install it just about anywhere.

Intelligent design
TRAPEX are available in 1.5 metre modules making it easy to transport and even easier to install the length that you need. Modules can be assembled in 1.5, 3 and 4.5 metre lengths1. The all-terrain foot assembly and link arm carry the weight of the TRAPEX barrier fence resulting in superior reliability and reduced maintenance.
1. Refer to Installation Considerations

It’s all in the box
The TRAPEX are semi-assembled. They come in 1.5 metre modules and include a mounting kit consisting of the steering arm assembly, foot assembly and all of the fasteners, spacers and end caps you may require for a quick and easy installation.

TRAPEX Dimensions and materialsModular sections length: 1.5 metres, pre-assembledVertical members: six per 1.5m length @ 250mm spacing

Vertical member length that extends above barrier pole: 95mm

Vertical member length below barrier pole: 692mm

Fence members: Ø19 aluminium round tube

Mass: 1.3kg/m (1.5m module = 2kg)

Aluminium flatbar section: 25mm x 5mm

Rivets used to fit the aluminium flatbar: 5mm

It’s advisable to lubricate the moving parts of the linkage assembly with easy to obtain Q20

Installation considerations – SECTOR barriers
Boom pole length Requirements
Existing Installation
3.0m The counterbalance spring in the 3m SECTOR barrier must be upgraded to a 4.5m unit
ref: 1187M01050A
The running speed of the SECTOR operator must be reduced to correspond to that of a 4.5m barrier (Raise / Lower time to change from 1.2 to 3 seconds)
4.5m The counterbalance spring in the 4.5m SECTOR barrier must be upgraded to a 6.0m unit
ref: 1187M010500
6.0m It is not possible to fit TRAPEX to a 6m SECTOR barrier
New Installation
3.0m A 4.5m SECTOR barrier must be ordered for this application with a 3m boom pole and 3m of TRAPEX
4.5m A 6m SECTOR barrier must be ordered for this application with a 4.5m boom pole and 4.5m of TRAPEX
6.0m It is not possible to fit TRAPEX to a 6m SECTOR barrier

PROXIMITY ACCESS CONTROL

SOLO – STAND-ALONE PROXIMITY ACCESS

Designed for small stand-alone access control applications where security, cost and simplicity are important

This exceptionally affordable device relies on a valid tag or access card being presented before access is granted. The SOLO can cater for 50 user tags (ZAPtags) with the ability to selectively add and delete users. It supports a single channel output with latch or non-latch functionality and the option to provide a secure link with the access point device via a “SmartSwitch”. SOLO offers other useful features such as door monitoring with alarm activation which will sound after a predetermined period if the door has been forced or simply left open.

Main features

Main features
50 tag memory
13.56Mhz operating frequency.
Excellent read range
Easy programming of user tags
Selectively add and delete tags
Free-exit input
Alarm output for:Door open
Door forced
Optional secure link (SmartSwitch II)
Weatherproof reader (surface and flush mount)
Optional anti-knock shield for reader

LATTICE – NETWORKED PROXIMITY ACCESS CONTROL

The Lattice proximity (RFID) access control system offers a really affordable and secure solution for tracking, controlling and monitoring the movement of staff and/or visitors in and out of premises.

It offers seamless expansion from a standalone 1000 tag reader (ZAPtags), all the way up to a fully fledged 32 reader network system with a sophisticated PC interface delivering advanced management and reporting capabilities.

By combining two readers, both directions of traffic flow can be controlled through up to 16 doors. Up to 7 levels of anti-pass back can also be set up for each individual tag.

Each reader provides a potential-free output or secure link via the optional “SmartSwitch” interface module to activate either a door lock, gate motor, traffic barrier etc.

The “door sense” input on each reader will monitor whether the door has been left open or even forced, activating a local buzzer or triggering an third party alarm.

The readers are weatherproof with surface and flush-mount options.

Main features

  • 1000 tag memory
  • 13.56Mhz operating frequency
  • Start as stand alone and add up to 31 slave heads
  • Excellent read range
  • Easy programming of user tags, made possible by  3 digit LED display
  • Selectively add and delete tags
  • Free-exit input
  • Alarm output for: Door open ; Door forced
  • Optional secure link (SmartSwitch II)
  • Anti-passback
  • Back-up memory module
  • Weatherproof reader (surface and flush mount)
  • Optional anti-knock shield for reader

LatticeWare – MANAGEMENT SOFTWARE FOR THE LATTICE ACCESS CONTROL SYSTEM

The system, whether a stand-alone reader or network, can be further enhanced by adding a PC with LatticeWare software. This software allows easy and intuitive management of the Lattice system. It is able to generate multiple access control reports, adds the ability of setting up of various timed functions in the system including: Event Logging, Time Barring, Timed Anti-Passback, and Time Lock.

Main features

  • Interface with the Lattice system at any stage
  • Complete and easy setup
  • Full management of the system
  • Multiple operating reports with export capability
  • LatticeWare accessible from any PC in a networked system
SAFLEC Access Control System – Flexible solutions for your security needs…

A networked access control system suitable for large, complex installations. It can easily integrate with various makes of Wiegand biometric readers such as Sagem.

Main features

  • Easy user-friendly installation and setup
  • Anti-passback and Zone control
  • Extremely flexible events & actions
  • Flexible Time & Attendance exporting
  • Site-based configuration and hardware filtering
  • Graphical event and alert monitoring and control
  • PC-Based actions for controlling 3rd party devices (CCTV, etc.)
  • Tag-holder sequencing tasks (enforcing Time & Attendance clockings)
  • Quick search filters, low bandwidth setting and on-the-fly configuration
  • Random search and tag holder counters for scripting
  • Software plug-in for PC-based overrides or custom extensions
  • Biometrics integration with Wiegrand readers such as SAGEM

SMARTGUARD – HARD-WIRED ACCESS CONTROL KEYPAD

For stand-alone access control at an entrance to a property, or inside a building, CENTURION offers theSMARTGUARD keypad which affordably delivers unmatched functionality and reliability.

The SMARTGUARD keypad can accommodate up to 1000 unique PIN codes with any user-defined length from one to ten digits. There are three separate outputs, each configurable to either latching or non-latching. Such functionality caters for many different scenarios for example, a motorised gate entrance may be opened fully using one code, activate the pedestrian opening using another, and switching on the house alarm using a third. User codes can also be selectively deleted without affecting other codes stored in the memory.

The keypad also boasts a “downcounter” allowing select codes to have a limited number of uses. This is ideal for granting single occasion access, for example to an armed response company with the code deleting itself after use.

The addition of the CENTURION SmartSwitch maximises security and ensures that even with the keypad mounted outside the property, it cannot be “hotwired” and the integrity of the site jeopardised.

The same memory module used on the SupaNOVA may also be used on the SMARTGUARD access control keypad, allowing all the settings and codes to be backed up and restored in seconds.
Main features

  • Multi-user capability
    This access control keypad can accomodate up to 1000 unique PIN codes with any user-defined length from one to ten digits.
  • Selectively add and delete
    User codes can also be selectively deleted without affecting other codes stored in the memory. This makes administering your access control database so quick and easy.
  • Three, two, one…Delete!
    The keypad also boasts a ‘downcounter’ allowing selected codes to have a limited number of uses. This is ideal for granting single occasion access, for example to an armed response company, with the code automatically deleting itself after use.
  • Multichannel functionality
    There are three seperate outputs, each configurable to either latching or non-latching. Such functionality caters for many different scenarios for example, a motorised gate entrance may be opened fully using one code, activate the pedestrian opening another, and switching on the house alarm using a third.
  • Secure – inside and out
    The addition of the optional CENTURION SmartSwitch maximises security and ensures that even with the keypad mounted outside the property, it cannot be “hot-wired” and the integrity of the site jeopardised.
  • Reliable memory backup
    The same memory module used on the SupaNOVA may also be used on the CENTURION SMARTGUARD keypad, allowing all the settings and codes to be backed up and then later restored in seconds.
SMARTGUARDAIR – WIRELESS ACCESS CONTROL KEYPAD

For stand-alone access control at an entrance to a property, or inside a building, CENTURION offers theSMARTGUARDair wireless access control keypad which affordably delivers unmatched functionality and reliability.

The SMARTGUARDair wireless keypad can accommodate up to 1000 unique PIN codes with any user-defined length from one to ten digits.

There are 15 separate channels, each able to be paired with any of the CENTURION code-hopping receivers. Suchfunctionality caters for many different scenarios for example:

  • a motorised gate entrance may be opened fully using one code, or
  • activate the pedestrian opening using another, and
  • switching on the house alarm using a third.

User codes can also be selectively deleted without affecting other codes stored in the memory.

The keypad also boasts a “downcounter” allowing select codes to have a limited number of uses. This is ideal for granting single occasion access, for example to an armed response company with the code deleting itself after use.

The same memory module used on the D10 industrial sliding gate motor, may also be used on theSMARTGUARDair, allowing all the settings and codes to be backed up and restored in seconds.
Main features

  • Multi-user capability
    This wireless keypad can accomodate up to 1000 unique PIN codes with any user-defined length from one to ten digits.
  • Selectively add and delete
    User codes can also be selectively deleted without affecting other codes stored in the memory. This makes administering your access control database so quick and easy.
  • Three…two…one…Delete!
    The CENTURION SMARTGUARDair keypad also boasts a ‘downcounter’ allowing selected codes to have a limited number of uses. This is ideal for granting single occasion access, for example to an armed response company, with the code automatically deleting itself after use.
  • Multichannel functionality
    There are 15 seperate channels, each of which can be paired with a CENTURION code-hopping receiverwhich means that up to 15 different devices can be activated using the SMARTGUARDair wireless keypad. Such functionality caters for many different scenarios for example, a motorised gate entrance may be opened fully using one code, activate the pedestrian opening using another, and switching on the house alarm using a third.
  • Reliable memory backup
    The same memory module used on the D10 sliding gate motor may also be used on theSMARTGUARDair, allowing all the settings and codes to be backed up and then later restored in seconds.
  • Wireless convenience
    The SMARTGUARDair is a wireless model making it easy to install. It operates off two AA Alkaline batteries which provide up to two years of battery life with up to 300 operations per day! It is compatible with CENTURION’s ultra-secure code-hopping receivers, including those onboard in many of our new operator controllers.

ACCESSORIES

G-SWITCH-22 GSM Module

GSM MOBILE NETWORK ENABLED MONITORING AND SWITCHING DEVICE

The CENTURION G-SWITCH-22 GSM module gives you complete control at your fingertips. With the ability to switch devices on and off and be sent SMS alerts – all via your phone – the G-SWITCH-22 lets you look after your home or business from just about anywhere.

Main features

  • Monitoring and alerting
    The G-SWITCH-22 GSM system looks after your property when you’re not around. It can be configured to monitor two separate electrical devices*, such as your home alarm or even a water reservoir. It will send you an SMS letting you know if your alarm is on or off or your reservoir is full or empty.
    *Certain functionality may require additional interface devices such as relays, isolators, etc.
  • Control
    Forgot to switch on the alarm before you left home? Don’t turn the car around…Control your home – from your phone. Simply call the G-SWITCH-22 (free of charge) or send it an SMS. You can turn a seemingly endless list of electrical devices on and off just by using your cellphone.
  • Easy online setup
    The only thing easier than using this wondrous GSM device is setting it up. Our intuitive G-WEB website lets you configure, monitor and receive reports online. Alternatively, you can even set your G-SWITCH-22 up with your cellphone.
  • G-WEB
    G-WEB 
    is a unique (and free!) offering from CENTURION that allows you to set up and monitor your G-SWITCH GSM devices via the Centurion Systems website. That means you don’t even have to waste precious time and petrol going to site – all G-SWITCH administration can be done from the comfort of your home or office.
  • Do G-SWITCH your way
    Whether you want your SMS input notification to say “Gate Activated” or something more James Bond-sounding like “Perimeter Breached”, you can easily customise the message alerts using the G-WEBinterface. With the simple click of a mouse, you can configure the outputs to respond to either a missed call or SMS, be pulsed or latching, and you can even set how many times a particular number is allowed to activate an output. Perfect for letting armed response companies in and out!
  • All-important security
    Besides being an admin dream, G-WEB is also great for surveillance and site monitoring. Detailed transaction logs tell you exactly when your G-SWITCH GSM modules were activated and by whom. You don’t have to be a super sleuth with G-WEB keeping tabs for you!
  • It’s oh so easy
    Using G-WEB, you are able to effortlessly add, edit and delete users, control all your G-SWITCH devices from a single user profile page and export transaction logs. Need to temporarily suspend access? It’s as easy as ticking a box and saying “You are the weakest link, goodbye!”. You get all this great functionality and convenience at no cost to you! And the best part? It’s password-protected so you don’t have to worry about those pesky hackers.
  • Memory
    The G-SWITCH-22 can remember and communicate with 300 different users – making it perfect for either residential, commercial or even industrial applications.
  • Security
    Password protection means that no one else can control your G-SWITCH-22 GSM module. Passwords can be changed as often as necessary so your security is never compromised, and only numbers that have been learned into the G-SWITCH-22 are able to operate it.

    Your G-SWITCH-22 can:

  • Switch two different electrical devices on or off, monitor them and send you SMS status alerts
  •  Communicate with up to 300 users
  • Activate devices via dropped call (free of charge) or SMS
  • Be configured quickly using our online G-WEB website, or from your phone
  • Remain secure with password protection
Examples of devices that can be monitored via the inputs Examples of devices that can be switched on or off  via the outputs
Geyser status: On/Off On/Off Automated entrance gates
Mains power: On/Off Geysers
House alarm: activated Appliances e.g. the fridge on board you boat
Fridge on board your boat: On/Off Air-conditioners
Borehole pump status: Running/Off Borehole pumps
Water reservoir: full/empty Disable vehicle ignition systems
Entrance gate status: Open/Pedestrian Lighting systems
Electric fence: alarm triggered Irrigation and water features
Vehicle monitoring: ignition or alarm activated Alarm systems

 

G-SWITCH-22 Technical Data
Physical
Supply voltage: 10-30V DC only
Standby current: 100mA
Maximum current: 500mA
Operating temperature: -20◦C – +85◦C
Output relay rating: 1A @ 30V DC (output 1 and 2)
Housing material: ABS
Degree of protection: IP55

 

Functional
Memory capacity: 300 individual numbers
Memory retention: >200 years
Output pulse time range: 1ms (default) to 50 days
Network required: GSM 900/1800MHz
SIM card required: Yes (activated)
Outputs: 2 (potential free)
Inputs: 2 (switch to common)
G-WEB

ONLINE USER INTERFACE FOR THE SETUP AND ADMINISTRATION OF G-SWITCH GSM DEVICES

Use the power of the internet to administer your G-SWITCH GSM devices from anywhere!

G-WEB is a unique (and free!) offering from CENTURION that allows you to set up and monitor your G-SWITCH GSM modules via the Centurion Systems website. That means you don’t even have to waste precious time and petrol going to site – all G-SWITCH administration can be done from the comfort of your home or office.

  • Do G-SWITCH your way

Whether you want your SMS input notification to say “Gate Activated” or something more James Bond-sounding like “Perimeter breached”, you can easily customise the message alerts using the G-WEB interface. With the simple click of a mouse, you can configure the outputs to respond to either a missed call or SMS, be pulsed or latching, and you can even set how many times a particular number is allowed to activate an output. Perfect for letting armed response companies in and out!

  • All-important Security

Besides being an admin dream, G-WEB is also great for surveillance and site monitoring. Detailed transaction logs tell you exactly when your G-SWITCH GSM devices were activated, and by whom. You don’t have to be a super sleuth with G-WEB keeping tabs for you!

  • It’s oh so easy!

Using G-WEB, you are able to effortlessly add, edit and delete users, control all your G-SWITCH devices from a single user profile page and view and export transaction logs. Need to temporarily suspend access? It’s as easy as ticking a box and saying “You are the weakest link, goodbye!”

You get all this great functionality and convenience at no cost to you! And the best part? It’s password-protected, so you don’t have to worry about those pesky hackers.
Main Features

  • Easy user interface to set up and administer CENTURION G-Switch devices
  • Password protected security
  • Control all your G-Switch devices from a single user profile page
  • Easy upload of multiple user phone numbers – ideal for large residential complexes
  • Quick and easy to add, edit or delete single or multiple user phone numbers
  • View and export transaction logs to monitor usage
POLOphone – AUDIO INTERCOM SYSTEM

The POLOphone is a uniquely styled intercom system that offers outstanding features, state of the art design and excellent value for money. The POLOphone is also a proud winner of the prestigious SABS Design Institute’s Design Excellence Awards.

The expandability of the POLOphone is quite exceptional. From a basic one-to-one kit for the average home, simply add components to the system to expand it into an ideal system for larger houses or small office installations. POLOphone can accommodate up to 4 handsets with a single entry panel or 3 handsets with two entry panels. Adding to its versatility you can intercommunicate between two groups of handsets in the system.

The POLOphone intercom system could not be simpler to install, using a 2-wire bus throughout. Connect entry panels and phones to any point on this bus and the system is up and running. Added to this, the system only requires a low current 12V DC power supply. It can be connected to the battery of a CENTURION gate motor for power failure protection.

From each handset, the gate motor, or door lock adjacent to the entry panel, can be operated. An auxiliary pushbutton is also provided for activating a secondary function such as the pedestrian-opening on the gate motor. In addition, the gate motor status feedback signal can be wired to the built-in indicator LED located in the cradle of each handset.
Main features

  • Only two wires
  • Expandable up to five components, maximum two entry panels
  • Each panel fitted with two call buttons
  • Single or dual call button modes of operation
  • Intercommunication between two groups of handsets
  • Award winning style handset.
  • Each handset incorporates:
    • Gate release for each entry panel
    • Auxiliary control button
    • Intercommunication call button
    • Gate status LED
  • 12V operation with optional battery backup
  • Built-in lightning protection
LEGRAND – AUDIO AND VIDEO INTERCOM SYSTEMS

A premium range of intercoms from basic one-to-one kits to large apartment and commercial/industrial systems with both audio and video capability.

Main features

  • Exceptional aesthetics
  • Weatherproof and durable aluminium entry panel
  • Particularly clear speech quality
  • 12V operation with optional battery backup
  • Fully expandable using modular design
  • Ability to interface with CCTV

MKII – CELLULAR NETWORK-BASED MULTI-UNIT INTERCOM SYSTEM

Cellular network-based multi-unit intercom system that allows convenient screening of visitors at the entrance to residential or business properties before allowing access.

The MKII intercom system offers the user management and administration features to maximise the functionality that that GSM based intercom systems can offer.

It is exactly this mobile and globally based communication technology that positions the MKII at the frontier of intercom system technology.

Differentiating features

  • Fully integrating with CENTURION remotes
    The MKII intercom system integrates with CENTURION’s ultra-secure code-hopping remote controls. Using an MKII CENTURION Loader*, these can easily be added into the system. You can easily administer remote controls that have been learned into the system over the internet. This may include assigning them to units, selectively deleting or time-barring specific remote controls, and automatically logging remote control transmissions.
    *MKII CENTURION Loaders are available from Centurion Systems
  • GSM – Global system for mobile communication
    Mobile communication has redefined the world as we know it and is integrated into every individual’s daily life. That is why a digital, mobile telephony system is the answer to efficient and effective secure, intercom systems. With the MKII there is no need for add-on modems and modules to use SIM cards. This feature also makes the MKII system less prone to lightning.
  • Mobile alert structure
    The Input Management Structure alerts complex managers, administrators and security guards via SMS when the electric fence alarm is activated and/or when the entrance or exit gate gets stuck opening. What makes this MKII feature even more unique when compared to competitor products is that it allows various settings and alert categories to match any type of installation. It is also completely programmable making it ideal for the various needs of different complexes. It also logs when the lid has been opened.
  • So easy to use!
    The MKII is user-friendly and very easy to operate and manage. No hassle, no fuss.
  • Flexibility
    The MKII intercom system allows three telephone numbers to be saved per individual unit, providing a well-received level of flexibility for both user and visitor. Security can contact residents whether they are in their house, out of town on their cellphone or landline; and residents are fully aware and in control of who is visiting. Reinforcing the flexibility and cost-efficiency of the MKII, especially its users, is the unique PIN code access control. This allows users (complex residents) to enter one of two PIN codes per unit, upon entering the complex; enabling the resident to enter the complex without incurring additional costs for additional access control devices.
  • Time-based access control
    This feature increases the security levels necessary in multi-unit establishments such as housing complexes or estates where staff or contractors may require access on a daily basis. Conveniently, the MKIIintercom system’s gate triggers can be set to only respond to certain remote controls or PIN codes during certain periods of time, such as 07h00 to 08h00 and 16h00 to 17h00, giving the complex the ability to allocate PINs and remote controls to people with limited access.

Main features

  • Quick and easy installation, no wiring other than mains supply – operates via cellular network
  • Uses new embedded SIM technology  – does not need a SIM card (SIM chip is not compatible with all networks. Please enquire.)
  • Cellphone or fixed line telephone doubles as an intercom handset and can receive calls from the gate station, and activate the entrance gate and up to two other access control devices
  • Visitor can select from up to three contact numbers per unit to call
  • Allows for visitor departure control (Free-exit facility)
  • Convenient web-based interface for system updating and reporting
  • Battery backup and built-in lightning protection
  • Robust and durable entry panel
  • CENTURION rolling code remote control integration and management§
  • Time-based access control
  • PIN code entry (two pre-programmed codes per unit)
  • Programming can be done online* or manually at the unit
  • Bulk SMS and email to complex residents
  • Individual resident reporting for phone bills and gate openings
  • Both successful and attempted-only gate openings are reported
  • Unlimited, controlled access for residents
  • Ability to communicate with security personnel at the gate
  • Back-lit LCD display (double line)
  • Weatherproof enclosure suitable for outdoor or indoor environments
  • Online resident database administration
  • Quick and reliable synchronisation and firmware updating
  •  Both successful and attempted-only gate openings are recorded

    §Built into the MKII requires optional CENTURION rolling code receiver with MKII firmware, as well as the MKII CENTURION Loader, both of which are available from Centurion Systems
    *requires a web access voucher

Report system capabilities

  • Gate Access Report
    Gate access operations i.e. the number dialled, PIN codes used, remote controls used, as well as the time, date and description of the gate opening.
  • Telephone Usage Report
    Distributes the total monthly cost billed to you by your cellular service provider on a per second basis, according to each unit’s call usage. This report provides the unit’s number, total call duration in seconds, unit’s overall system usage and the total amount due from each unit.
  • Audit Report per Complex
    A complete report of edits or changes made to a unit’s record during a specific period. The report records the date and time of change, who made it, as well as the action performed and the unit affected.
ARMADA ELectric Gate Lock

Add that extra level of security to your entrance!

How secure is your motorised gate, is it a soft target? With the ARMADA Electric Gate Lock fitted you’ll never have to worry about it again!

The ARMADA Electric Gate Lock as been developed for both swing and sliding gates and interfaces seamlessly with the gate motor system, unlocking the moment the gate starts to open and locking securely when it closes again. It incorporates a key-operated barrel lock allowing for convenient manual override.
Main features

Robust, stainless steel construction for all weather and coastal installations

Designed for both motorised and manually operated gates

Activates by using your existing remote control

Unlocks just before the gate is opened and re locks when the gate closes

Bolt action ensures secure locking of double leaf, or single, swing gate systems

High volume capability so it is ideal for both residential and commercial, as either new or retrofit installations

Low force lock engagement ensures reliable operation even at the tip of a wide gate

Models available for swing gates and sliding gates in both left and right hand configurations

12V DC operation with optional power failure protection
(typically connect to battery supply of gate motor – 4A draw for maximum five seconds)

Instant security as lock automatically engages when gate is closed

Convenient manual override incorporating key operated barrel lock

Optional mounting box for easy installation onto gate frame

 

Close Technical Details

 

ARMADA Electric Gate Lock’s Technical Data
Data Description
Operating voltage 12V DC
Maximum current draw 4A @ 12V
Maximum pulse duration 4 seconds
Lock bolt depth 8mm
Operating temperature range 0◦C to 45◦C
Dimensions 270mm H x 65mm W x 50mm D
Weight 900g
Material
Lock casing
Lock bolt
Lock toe
Grade 304 stainless steel
Grade 304 stainless steel 12mm pin
Grade 316 stainless steel
FLUX SA – FAST, INTELLIGENT AND RELIABLE INDUCTIVE VEHICLE LOOP DETECTOR

The FLUX SA is a single channel, stand-alone highly sensitive inductive loop detector designed for vehicle access applications.

The detector is responsive, highly sensitive, and utilises sophisticated software algorithms which adapt to prevent false triggering due to changing environmental conditions. Easy to use dipswitches, as well as visual and audible feedback of inductive loop operation, ensure a hassle-free installation experience.

Typical uses include free-exit loops, safety loops, closing loops for traffic barriers, arming loops for access controlequipment, and general vehicle sensing applications.

Main features

Very fast detection speed for quick response times

Detection filter and high-level circuit and loop protection provides excellent immunity to interference from external sources for improved reliability

Easy to install and commission saving you time and money

Audible and visual diagnostics for ease of set up and maintenance

Removable terminals for quick and easy maintenance

Boot-loader interface for ease of firmware upgrades

Dedicated reset button to assist with quick maintenance procedures

Wide, adaptive self-tuning range for outstanding reliability

Excellent, strong loop field strength for reliable operation

Selectable Permanent Presence feature to prevent unintended barrier or gate closure

Automatic Sensitivity Boost feature which boosts the sensitivity automatically for the reliable detection of  variable height vehicles

Compact housing with clever design features enhancing ease of installation and monitoring diagnostics

 

FLUX SA Stand-alone Inductive Vehicle Loop Detector
Data Description
Operating voltage 10 – 40V DC, or 7 – 28V AC
Standby current 50mA
Output relay rating 1A @ 125V AC
Detection time 4ms @ 100kHz loop frequency
10ms @ 40kHz loop frequency
Visual LED indicators Showing Power; Loop Fault; Loop detection level (five LEDs); Detect
Audible indicators Buzzer with indication of loop detection level and loop fault
Weight 900g
Detector tuning range  15 – 1500µH
Electronics protection  Isolation transformer with 10kA lightning protection
Dimensions 105mm (length) X 60mm (width) X 26mm (height)
DC CONVERTER BATTERY BACKUP MODULE FOR THE A10

A simple connection that enables your A10 to stay on guard when the lights go off

Main features

On-demand battery backup protection

Brown-out power failure detection

Battery-protection circuitry

Thermal overload cut-out

Integral battery charger

Power-saving mode

System diagnostic outputs

Technical Details

DC CONVERTER BATTERY BACKUP MODULE’s Technical Data
Data Description
Input voltage
DC Converter
Battery charger
12V DC
220V AC +/-10%, 50Hz
Input current
DC Converter at rated load
Battery charger
80A peak / 30A continuous
170mA
Battery charger output 2A
Operating cycles per Ah of capacity Min 1 open/close cycle
Duty cycle 20%
Battery capacity Min 12Ah but 35Ah is recommended

– Can operate off a solar supply, consult Centurion Systems for assistance
– Based on 25oC ambient temperature and unit not in direct sunlight
– Battery housed in separate enclosure

Virdi

VIRDI AC F100

Convergence of Biometric Access Control & Smart Phone Technology

ACF100 is an evolution in Biometric Access Control technology
A new standard in aesthetic and robust design is achieved without compromising technical functionality.

  • nted optical sensor and algorithm detects cone and rubber
  • or installation
  • Reduce the installation time and cost with WIFI
Items ACF100
Template Capacity 1,000 Fingers (1,000 users)
Log Capacity 1,000,000 Events
Cards Supported 125 KHz Proximity Card
13.56 MHz Smart Card
Operation Mode Fingerprint, Card
Communications RS-485, Wiegand In & Out
PC Interface WIFI (Standard)
Lock Control 2port Control Motor Lock or 1port Control EM/Strike/Deadbolt Lock
Fingerprint Sensor 500Dpi Optical Sensor
Fake Fingerprint Detection Paper, Film, Rubber, Silicon, etc
FRR / FAR 0.1% / 0.0001%
Supply voltage DC 12V ~ 24V
Operation
Environment
-20 ~50¡Æ / Lower than 90% RH (Non-condensing)
Dimension 68(W) X 138(H) X 37(D) mm